Skip to content

DESCO Europe Multi-Mount Continuous Monitor with Universal Power Adapter, 19337

€362.79 Inc. VAT

Code p-E12441


Add to Basket
Product Details

DESCO Europe Multi-Mount Continuous Monitor with Universal Power Adapter, 19337

The Desco Multi-Mount Continuous Monitor is a single workstation continuous monitor. It continuously monitors the path-to-ground integrity of one operator and one ESD worksurface. Mounting tabs make it suitable to install in workbench or equipment settings. Connect the 19332 Light Tower accessory for increased alarm visibility.

The Multi-Mount Continuous Monitor is designed with Wave Distortion Technology which provides stable continuous monitoring of the path-to-ground and presence of 1 megohm resistance of an operator’s wrist strap. Audio and visual alarms activate (in less than 50 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The Multi-Mount Continuous Monitor also monitors for a worksurface path-to-ground of less than 10 megohms. All Multi-Mount Continuous Monitors are calibrated to NIST standards.

Features:
  • Single Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
  • NEW Park Delay Timer and ParkSnap™
    Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
  • NEW Light Tower Jack
    Connects with the 19332 Light Tower accessory
  • Wave Distortion Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
  • Mat Monitor Switch
    Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • Audible Alarm Adjustment
    Sets the audible alarm volume from loud to louder
  • Enclosure with Mounting Tabs
    Installs in workbench and equipment environments
  • Single-Wire Impedance Design
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time
    Identifies failures and intermittencies
Included:
  • 1 Multi-Mount Continuous Monitor
  • 1 Mat Monitor Cord (White)
  • 1 Countersunk Washer
  • 1 Flat Head Screw, 6-32 x 1/4"
  • 2 Pan-Head Screws, #6 x 3/8"
  • 1 Dual Lock Fastener Set, 2" Length
  • 1 10 mm Interchangeable Park Snap
  • 1 10 mm Operator Jack Adapter
  • 1 Power Adapter with IEC C14 Inlet, 9 VDC
Delivery Info

Please allow 1 - 2 Business Days for Delivery

Free delivery on all orders over €49.99 + VAT, Click here for more information 

Returns Policy

Easy Returns via Store, Post or Courier

Caulfield Industrial  are happy to accept items returned to us within 28 days of purchase and in this case we offer you an exchange or a full refund once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of Caulfields and may be refunded as a credit against a future purchase. All items must be returned to Caulfields in the same condition in which they were shipped and in a saleable condition. Caulfield Industrial reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.

Downloads
Click to view complete product details

Recently Viewed Products Clear All

Close

POP-IN HTML goes here

Close

Your Basket

Your basket is currently empty