Tente 3648 IEP Heavy Duty Fixed Castors
Tente 3648 IEP Heavy Duty Fixed Castors is available to buy online at Caulfield Industrial.
Features:
- Heavy duty castors from Tente
- This fixed castor has a pressed steel housing, polyurethane wheel with an aluminium centre
- Polyurethane tyred wheels have high tear strength and abrasion resistance which gives them a life of up to 10 times that of rubber under similar operating conditions
- Polyurethane is able to carry loads approaching that of cast iron
- Polyurethane has a lower tractive resistance than rubber for the same load so is better for manual handling of very heavy loads
- Polyurethane is not affected by greases and mineral oils
- Load capacity tested according EN12532 (4 km/h) and EN12533 (6 km/h)
3648 IEP (125mm)Specifications:
- Wheel Diameter: 125 mm
- Load Capacity (4 km/h): 300 kg
- Load Capacity (6 km/h): 240 kg
- Tyre Material: Polyurethane
- Hub Material: Aluminium
- Width of Tread: 50 mm
- Size of Plate: 135 x 115 mm
- Plate Hole Centres: 105 x 80/75 mm
- Plate Hole: 11 mm
- Overall Height: 178 mm
3648 IEP (160mm)Specifications:
- Wheel Diameter: 160 mm
- Load Capacity (4 km/h): 350 kg
- Load Capacity (6 km/h): 280 kg
- Tyre Material: Polyurethane
- Hub Material: Cast Iron
- Width of Tread: 50 mm
- Size of Plate: 135 x 115 mm
- Plate Hole Centres: 105 x 80/75 mm
- Plate Hole: 11 mm
- Overall Height: 210 mm
3648 IEP (200mm)Specifications:
- Wheel Diameter: 200 mm
- Load Capacity (4 km/h): 450 kg
- Load Capacity (6 km/h): 360 kg
- Tyre Material: Polyurethane
- Hub Material: Cast Iron
- Width of Tread: 50 mm
- Size of Plate: 140 x 110 mm
- Plate Hole Centres: 105 x 80/75 mm
- Plate Hole: 11 mm
- Overall Height: 250 mm