FLUKE i400 AC Current Clamp
The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.
Features
- Companion to your DMM to measure up to 400 A AC
- 1 mA/Amp output guarantees easy reading on you meter
- Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
- Specially designed to offer maximum utility in a very compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle prevents from accidental touching live wiring
- Max. conductor Ø 32 mm
Specifications
- Nominal current range: 400 A
- Continuous current range: 1 A - 400 A
- Maximum non-destructive current: 1000 A
- Lowest measurable current: 1A
- Basic accuracy: 2% + 0.06 A/(45-400 Hz)/(% reading + floorspec)
- Useable frequency: 5 Hz - 20 kHz
- Output level(s): 1 mA/A
- Safety: CAT IV 600 V, CAT III, 1000 V
- Maximum voltage: 1000 V AC rms from earth to ground, in compliance with EN61010
- Maximum conductor diameter: 32 mm (1.25 in)
- Maximum conductor size (busbar): 750 MCM
- Output cable length: 1.5 m (59 in)