Bostitch SB-HC50FN 16 Gauge Concrete Block Nailer
Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into a block and gripper rods into floor screeds. It is not recommended that this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.
Features:
- Aluminium Housing
- Adjustable Exhaust
- Rubber Comfort Grip
- Sequential Trip
- No-Mar-Tip
- Bottom Loading
- Dial-A-Depth
Specifications:
- Power Type: Pneumatic
- Magazine Capacity (Maximum): 100 mm
- Fasteners Diameter: 1.8 mm
- Fasteners Length (Maximum): 50 mm
- Fasteners Length (Minimum): 20 mm
- Fasteners Head (Maximum): 3.2 mm
- Fasteners Head (Minimum): 2.8 mm
- Collation Angle: 0 degree
- Operating Pressure: 5.00 - 7.00 bar/72.00 - 100.00 psi
- Air Consumption (Ltr.per shot at 5.6 bar): 1.6
- Air Fitting Thread Type: 1/4 bsp
- Noise Level (LPA 1sd): 96.80 dB(A)
- Noise Level (LWA 1sd): 100.30 dB(A)
- Noise Level (LPA 1s, 1m): 87.30 dB(A)
- Vibration: 2.13 m/s²
- Length: 293 mm
- Width: 76 mm
- Height: 275 mm
- Weight: 1.98 kg