Ambersil 30248 Perma-Lock Silicone Lubricant, 400ml
Ambersil Silicone Lubricant uses where friction reduction is required particularly plastic-to-plastic components, on guide rails or as a label adhesive anti-stick treatment to dramatically reduce label adhesive build-up.
Features:
- Highly water resistant
- Excellent release properties
- Forms a colourless, non-staining film
- Eliminates sticking, squeaking and binding
- Dry film ensures no product contamination
- Does not contain nut oils or nut oil derivatives
- Protects Metals, Plastics, Rubbers and Other Surfaces
- Repels Water From Glass, Ceramics, Fabrics and Leather
- Use on high-speed bagging lines and on chutes/slides
- Excellent general lubrication with a relatively dry film
- Low surface tension gives better coverage and deeper penetration
- Fitted with a 360-degree spray system for all angle use, even upside down
Applications:
- Prevents hardening and freezing of rubber seals
- Prevents plastic assemblies from squeaking and binding
- Renovates Plastic, Rubber and Wooden surfaces
- Provides excellent lubrication especially between parts made of dissimilar materials (e.g. Metal/Plastic, Plastic/Plastic and Metal/Rubber)
- For use on virtually any part and equipment made of Metal, Plastic, Rubber, Nylon or Wood
- Protects and Lubricates Tools, Hoists, Jacks, Locks, Latches, Switches and Controls, Zippers, Springs and Pulleys
- As a release agent in the moulding of plastic and rubber parts
Specifications:
- Volume: 400 ml
- Appearance: Clear, Water-white liquid
- Specific Gravity (at 20 degree Celsius): 0.7
- Distillation Range of Solvents: 50–70 degree Celsius
- Flash Point (Closed Cup): < 0 degree Celsius
- Vapour Density (Air = 1): > 3
- Operational Temperature Range: -40 degree Celsius to 200 degree Celsius
- Flash Point (Closed Cup): > 300 degree Celsius
- Pour Point: < -40 degree Celsius
- Long Term Stability Temperature: 150 degree Celsius
- Surface Tension: 21 mN/m
- Dielectric Strength: 35 kV
- Viscosity (at 20 degree Celsius): 11-14 mPas