TEC7
CLEANER Universal Cleaner and Degreaser 500ml
€8.60
Ex. VAT
TEC7 CLEANER Universal Cleaner and Degreaser 500ml
Features
- Ideal for finishing adhesive edges, joints and seams
- Degreasing and cleaning tools and workshop equipment, both hand tools and machines – does not attack lacquer or synthetic material
- Remove adhesive residues and old stickers
- Perfect degreasing of ferrous and non-ferrous metals. Will not form an oxide layer with light metals.
- Removes uncured TEC 7, FLEX 7 and X-TACK 7
- Acid-free
Using Tec 7 Cleaner
- Spray TEC 7 Cleaner on the surfaces to be bonded and rub them dry with a clean cloth.
- Then allow TEC 7 Cleaner to evaporate completely before bonding the materials. This normally takes between 2 to 5 minutes depending on the amount used.
- If necessary, repeat this treatment.
Tec 7 Cleaner Tips
- Always allow Tec 7 Cleaner to work in for a while.
- Safe for use on natural stone.
- Contains no acids.
- Always use a good, straight-edged spatula to smooth off joints.
- When using Tec 7 cleaner to finish joints on Natural Stone, please use the product sparingly in order to avoid over diluting the sealant to the extent where the product becomes embedded in the porous substance.
Specifications
- Colour: colourless.
- Odour: slight solvent odour.
- Condition at room temperature: liquid.
- Boiling point: 138°C - 175°C.
- Vapour pressure: 1.0 KPA 20°C.
- Specific gravity: 0.72 - 25°C.
- Flash point: 27°C.
- Spontaneous ignition: 208°C.
- Shelf life: 12 months.
- Size: 500ml
https://www.caulfieldindustrial.com/p/tec7-cleaner-universal-cleaner-and-degreaser-500ml-/p-e12406
P-E12406
TEC7 CLEANER Universal Cleaner and Degreaser 500ml
https://abclive1caulfields.s3.amazonaws.com/32bda22a-2ec4-4965-9cac-b75e246468b0/productimage/E12406___L.jpg
8.60
8.60
EUR
InStock
/Service Aids/Sealants & Fillers/Silicone Sealants & Removers
TEC7