SAUTER
HB Analogue Shore Hardness Tester
€115.00 - €140.00
Ex. VAT
- Typical application: measurement of penetration (Shore)
- Particularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 53505 are often not possible because of very narrow standard tolerances
- Shore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
- Shore D: plastics, formica, epoxides, plexiglass, etc.
- Shore C/0: foam, sponge, etc.
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Can be attached to the test stands SAUTER TI-AC (for Shore A and 0), TI-D (for Shore D)
- Delivered in a wooden carrying case
Technical Data
- Precision: 3 % of [Max]
- Dimensions LxWxH 115x60x25 mm
- Net weight approx. 0,16 kg
https://www.caulfieldindustrial.com/p/sauter-hb-analogue-shore-hardness-tester/p-e10508
p-E10508
SAUTER HB Analogue Shore Hardness Tester
https://abclive1caulfields.s3.amazonaws.com/32bda22a-2ec4-4965-9cac-b75e246468b0/productimage/P-E10508___L.jpg
115.00
115.00
EUR
InStock
/Measuring/Measuring Instruments/Hardness & Surface Testers
SAUTER