Mitutoyo 2110A-70 1mm/0.1mm Flat Back Dial Indicator
This is a standard type metric dial indicator with 0.001 mm scale graduation, 1 mm range.
Features:
- The stem spindle is made of high strength quench hardened stainless steel which resists strenuous use also carbide contact point is used
- The grand gear uses stainless steel that is resistant to wear and deformation, application of a hard coating on the surface of the crystal makes the gauge highly scratch and chemical resistant
- Stem diameter 8 mm, M2.5-0.45 thread size and Measuring force is 2.0 N or less
- Shockproof, waterproof, jewelled bearing and double scale spacing
- Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face
- A carbide contact point is used
- Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant
Specifications:
Range: | 1 mm |
Range
per rev.: | 0.1 mm |
Graduation: | 0.001 mm |
Scale: | 0-100 (100-0) |
MPE any 1/10
revolution: | 2.5 µm |
MPE any 1/2
revolution: | 4 µm |
MPE any 1
revolution: | 4.5 µm |
MPE measuring range: | 5 µm |
H MPE (Hysteresis): | 2 µm |
R MPE (Repeatability): | 1 µm |
Measuring force: | 0,4-2 N |
Mass: | 150 g |
Continuous dial: | Yes |
Double scale spacing: | Yes |
Shockproof: | Yes |
Jeweled bearing: | Yes |
IP64: | Yes |
Digital/Analog: | Analog |
Inch-Metric: | Metric |
Type: | EN ISO Standard |
Stem: | 8 mm |
Contact point: | Carbide tipped, thread: M 2.5 x 0.45 mm |
Delivered: | with certificate of inspection |