FLUKE
AC/DC Current Clamps
€329.18 - €566.80
Ex. VAT
Fluke AC/DC Current Clamps
Fluke AC/DC Current Clamps is available to buy online at Caulfield Industrial.
i410 Features:
- The Fluke i410 AC/DC current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current
- The Large clamp claw gives you access to difficult to reach areas
- Battery-powered Hall-effect probe measures 1 to 400 Amps
- 1 mV/Amp output guarantees easy reading on your meter
- Take accurate current readings without breaking the circuit
- CAT III 600 V safety rating
i1010 Features:
- Fluke current clamps extend the current ranges of Fluke tools
- The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 to 1000 Amps and provides accurate current reading without breaking the circuit
- This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas
- Compatible with most Fluke multimeters
i410 Specifications:
Battery Type |
9 volt Battery |
Battery Life |
60 hours |
Maximum Voltage |
600 volt |
Maximum Conductor Diameter |
30 mm 2 x 25 mm |
Output Cable length |
1.6 metre |
Measurement Type |
Hall Sensor |
Nominal Current Range |
400 Amps, AC/DC |
Continuous Current Range |
1 to 400 Amps, AC/DC |
Maximum Non-Destructive Current |
400 Amps |
Lowest Measurable Current |
0.5 Amps |
Basic Accuracy |
3.5 percent + 0.5 Amps (Percent Reading + Floorspec) |
Useable Frequency |
DC - 3 kHz |
Output level(s) |
1 mV/A |
i1010 Specifications:
Battery Type |
9 volt Battery |
Battery Life |
60 hours |
Maximum Voltage |
600 volt |
Maximum Conductor Diameter |
30 mm 2 x 25 mm |
Output Cable length |
1.6 metre |
Measurement Type |
Hall Sensor |
Nominal Current Range |
600 Amps, AC
1000 Amps, DC
|
Continuous Current Range |
1 to 600 Amps, AC
1 to 1000 Amps, DC
|
Maximum Non-Destructive Current |
1000 Amps |
Lowest Measurable Current |
0.5 Amps |
Basic Accuracy |
3.5 percent + 0.5 Amps (Percent Reading + Floorspec) |
Useable Frequency |
DC - 10 kHz |
Output level(s) |
1 mV/A |
https://www.caulfieldindustrial.com/p/fluke-ac_dc-current-clamps/p-124257
P-124257
Fluke AC/DC Current Clamps
https://abclive1caulfields.s3.amazonaws.com/32bda22a-2ec4-4965-9cac-b75e246468b0/productimage/P-124257___L.jpg
329.18
329.18
EUR
InStock
/Measuring/Multimeters & Accessories/Clamp Meters
FLUKE