Fluke AC/DC Current Clamps available online - Caulfield Industrial
Go

Fluke AC/DC Current Clamps

€249.00 - €429.00 Ex Vat

€306.27 - €527.67 Inc VAT

Fluke AC/DC Current Clamps View Large Image
P-124257

See Alternative
Title Quantity Price Availability
Fluke AC/DC Current Clamps €249.00 - €429.00 Ex Vat €306.27 - €527.67 Inc VAT
Add To Basket Add to Wishlist

Fluke AC/DC Current Clamps

 

Fluke AC/DC Current Clamps is available to buy online at Caulfield Industrial.

i410 Features:
  • The Fluke i410 AC/DC current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current
  • The Large clamp claw gives you access to difficult to reach areas
  • Battery-powered Hall-effect probe measures 1 to 400 Amps
  • 1 mV/Amp output guarantees easy reading on your meter
  • Take accurate current readings without breaking the circuit
  • CAT III 600 V safety rating
i1010 Features:
  • Fluke current clamps extend the current ranges of Fluke tools
  • The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 to 1000 Amps and provides accurate current reading without breaking the circuit
  • This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas
  • Compatible with most Fluke multimeters
i410 Specifications:
Battery Type 9 volt Battery
Battery Life 60 hours
Maximum Voltage 600 volt
Maximum Conductor Diameter 30 mm
2 x 25 mm
Output Cable length 1.6 metre
Measurement Type Hall Sensor
Nominal Current Range 400 Amps, AC/DC
Continuous Current Range 1 to 400 Amps, AC/DC
Maximum Non-Destructive Current 400 Amps
Lowest Measurable Current 0.5 Amps
Basic Accuracy 3.5 percent + 0.5 Amps
(Percent Reading + Floorspec)
Useable Frequency DC - 3 kHz
Output level(s) 1 mV/A
i1010 Specifications:
Battery Type 9 volt Battery
Battery Life 60 hours
Maximum Voltage 600 volt
Maximum Conductor Diameter 30 mm
2 x 25 mm
Output Cable length 1.6 metre
Measurement Type Hall Sensor
Nominal Current Range

600 Amps, AC

1000 Amps, DC

Continuous Current Range

1 to 600 Amps, AC

1 to 1000 Amps, DC

Maximum Non-Destructive Current 1000 Amps
Lowest Measurable Current 0.5 Amps
Basic Accuracy 3.5 percent + 0.5 Amps
(Percent Reading + Floorspec)
Useable Frequency DC - 10 kHz
Output level(s) 1 mV/A
Clear All

Your Recently Viewed Products

Fluke AC/DC Current Clamps

Fluke AC/DC Current Clamps

€249.00 - €429.00 Ex Vat

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up