SOUDAL FIXALLFBHH750ML Fix All Fills & Bonds Hand Held 750ml available online - Caulfield Industrial
Go

SOUDAL FIXALLFBHH750ML Fix All Fills & Bonds Hand Held 750ml

€12.00 Ex Vat

SOUDAL FIXALLFBHH750ML Fix All Fills & Bonds Hand Held 750ml View Large Image
P-e12139

See Alternative
Title Quantity Price Availability
SOUDAL FIXALLFBHH750ML Fix All Fills & Bonds Hand Held 750ml €12.00 Ex Vat
Add To Basket Add to Wishlist

 

SOUDAL FIXALLFBHH750ML Fix All Fills & Bonds Hand Held 750ml

 

The Soudal FIXALLFBHH750ML is a hand-held, single component, self-expanding polyurethane adhesive which has been developed for the clean, efficient, economic and permanent bonding of insulation panels and lightweight decorative elements in wall and roof areas. The FIXALLFBHH750ML is available to buy at Caulfields and provides an excellent initial bond even at low temperatures and is suitable for both vertical and horizontal applications. This PU adhesive has a very wide adhesion spectrum including plasterboard, dry lining, roofing, concrete, stone, brick, timber, various insulation panels and decorative elements based on PU; Polystyrene, Phenol Resin Foam etc. This Soudal PU adhesive can also be applied at temperatures as low as -5°C although the temperature of the aerosol can needs to be at least +5°C, remains flexible and doesn’t become brittle as well as being suitable for use on uneven surfaces.

 

Features:
  • Economic in use due to precise application – sufficient for 12m² of insulation panels (3 beads per m²)
  • Excellent insulation, enhances performance of insulation panels when filling gaps (ca 0,036 W/(m·K)
  • Limited post expansion, resulting in fast and precise installation of insulation panels
  • Fast curing: 1 hour after application work can continue on flat roofs or boards can be plastered
  • Free of CFC’s & HCFC’s - Propellant gas doesn’t damage ozone layer
  • Free of solvents
  • Compatible with most types of paints, many solvents and chemical substrates

 

Specifications:
  • Base: Single Component Polyurethane
  • Consistency: Stable Adhesive Foam – Doesn’t Sag
  • Curing System: Moisture Cure at room temperature
  • Skin Formation: +/-8 minutes (20°C/65% R.H.)
  • Drying time: Dust free after ca 9 min. – 30mm adhesive bead
  • Can be trimmed: +/-40 minutes – 30mm adhesive bead
  • Full strength: +/-12 hours – 30mm adhesive bead
  • Post expansion: Minimal
  • Heat Transmission (DIN 52612): About 0.036 W/(m·K)
  • Tear Strength (DIN EN 1607): 0.18 N/mm²
  • Shear Strength (DIN 53427): 0.12 N/mm²
  • Resistance to bending (DIN5342): 0.6 N/mm²
  • Resistance to pressure (ISO844): 0.3 N/mm²
  • Elongation at break: ~25%
  • Water absorption (DIN53428): <1%
  • Shrink: <3%
  • Temperature Resistance: -40°C until +90°C when cured; +120°C (until maximum 1hr)
  • Fire Rating: B2 (normal flammability)
  • Yield: +/-12m² per can of 750ml – 30mm adhesive bead

 

Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up