Fluke 373 True-RMS AC Clamp Meter
Caulfield Industrial offers this ingenious Fluke clamp meter to any professional searching for a device that will give them accurate readings of load currents with ease. The large LCD backlight is easy to read, with buttons and nobs clearly marked for enhanced operation. A signal processing feature makes it easier for you to use this Fluke clamp meter in noisy electrical environments without compromising the measurements. Because it has a compact design, you can use it in confined spaces. The Fluke clamp meter comes with a soft carry case that will safely store it when being transported or not in use. This is not to say this device is fragile, as it is built from highly durable materials that enhance its strength and extend its service life.
Features:
- Provides True-RMS voltage and current measurements to accurately measure non-linear signals
- Automatically selects a measurement range based on voltage present so you don’t need to change the switch positions while taking a measurement
- Presents readings on a large, easy-to-read backlit display
- Features CAT IV 300 V, CAT III 600 V safety ratings
- True-RMS ac voltage and current for accurate measurements on non-linear signals
Specifications
AC Current |
Range |
600 Amps |
Resolution |
0.1 Amps |
Accuracy |
2 percent ± 5 digits (48-62 Hz) |
Crest Factor (50/60 Hz) |
2.5 at 600 Amps |
AC Voltage |
Range |
600 volt |
Resolution |
0.1 volt |
Accuracy |
1.0 percent ± 5 digits (48-62 Hz) |
DC Voltage |
Range |
600 volt |
Resolution |
0.1 volt |
Accuracy |
1 percent ± 5 digits |
Resistance |
Range |
600/6000 Ω |
Resolution |
0.1/1 Ω |
Accuracy |
1 percent ± 5 digits |
Continuity Beeper |
30 Ω |
Capacitance |
Range |
10-100/1000 μF |
Resolution |
0.1 μF/1 μF |
Accuracy |
1.9 percent ± 2 digits |
Operating Temperature |
-10 to 50 degree Celsius |
Storage Temperature |
-40 to 60 degree Celsius |
Operating Humidity |
Non condensing (< 10 degree Celsius) ≤ 90 percent RH (at 10 to 30 degree Celsius) ≤ 75 percent RH (at 30 to 40 degree Celsius) ≤ 45 percent RH (at 40 to 50 degree Celsius) (Without Condensation) |
Operating Altitude |
3000 metre |
Storage Altitude |
12,000 metre |
Temperature Coefficients |
Add 0.1 x specified accuracy for each degree Celsius above 28 degree Celsius or below 18 degree Celsius |
Battery Type |
AA |
Size |
232 mm x 85 mm x 45 mm |
Weight |
0.37 kg |
Includes:
- 5 x AA Alkaline Batteries
- Coated instruction card
- Safety information sheet
- Soft carrying case
- TL75 test leads
Get your very own Fluke clamp meter online from Caulfield Industrial today.